sind nun veröffentlicht worden:
"DFICA Chair Phil Burgess had the following to say –
“The DFICA Rules Committee finalised the latest rule changes overnight in time for the 1st July application.
The notable changes are the hull sticker as a preventative measure, larger sail numbers for the DF65 and banning some hull and appendage treatments. The hull has to be a factory finish in gloss paint but decals may be applied. This arose from the Globals where several boats had excessive fairing left unpainted of the hull, keel, bulb and rudder. Existing painted hulls will be grandfathered until 2025.
We requested a definition of the DF65 battery hatch size. The Committee’s response was that they don’t think it’s necessary to define a size. It’s description says its sole function is to cover the hatch, so if it is big enough to cover one of the bolt holes then it has gone beyond that definition. It would also be just another event measurement, which we don’t need. So, I think a patch that covers the keel box channel immediately adjacent to the hatch is permitted, provided it doesn’t extend over the keel box bolt holes or the keel recess.
Rule changes will always attract comment, analysis and criticism, so the consistent key message to all skippers should always be that the boats are required to be sailed out of the box under the spirit set out in A.5. If we start using “non-performance enhancing” justifications, it opens up a precedent for many changes where the rules would need to become very definitive and run into many more pages. Use the KISS principle.“
für DF65 und DF95 unter:
https://dfracing.world/class-rules/
für die DF95 die aktuellen Regeln und Änderungen zur abgelösten Version
und Masse für den fin-box-sticker unter:
Keine Kommentare:
Kommentar veröffentlichen